Earthmoving Radiators

Earthmoving Radiators From M.P.R Minimise Downtime

M.P. Radiators can offer all services relating to HEM radiators, oil coolers ,heat exchanger, with full refurb, new tubes, tube cleaning or just new seals. With one of the quickest turnarounds in the country.

M.P.R are very experienced at manufacturing and repairing all types of HEM radiators with capabilities of remanufacture and Next Generation radiator core sections.

We use higher quality tubes of 33x.14 mm,german machinary,thicker walled materials on the tubes, fins and CNC machined tanks from solid brass. This makes M.P.R the best aftermarket replacement in India with a rapid service turnaround, with the average radiator back to client within 2-4 days on average.

Using strict QA procedures and quality checks M.P.R will give you back your like new or better. Check our website for our quality system documented, step by step procedure to superior radiator refurbishment.

Over time, all radiators will accumulate sludge and dirt inside their coolant channels. Some of this unwanted debris becomes stuck to the interior surface of the radiator. Even if the old coolant is drained off and replaced with fresh coolant something that should be done fairly regularly anyway, it is often hard to remove what may seem to be firmly fixed debris. The main problem with accumulated dirt and sludge inside the coolant is threefold. It means that the transfer of heat is reduced and that’s not good for the engine. Part of he reason for the reduction in efficiency is the lining of material that gets stuck to the inside of the radiator. Because the heat loss is best through metal (a good conductor), any build up tends to cause insulation and less conduction.

Also, the sludge and dirt blocks the passages through the radiator itself as well as the engine, so again reducing efficiency. If a radiator is left in that condition for too long, the engine cooling ability could be compromised and

then overheating could result in a very expensive rebuild. The third reason why sludge and dirt in the radiator is not desirable is because it can become chemically corrosive, and it then starts to attack the metal walls. Cleaning and flushing the radiator means that this corrosive effect is minimised.